RP-TOOLS

Workshop trolley in round-edge design for the PROFI. With 7 drawers and tool assortment 220 pcs. A useful helper for anyone who is a professional or recreational handyman is the RP workshop trolley (equipped) "RP-JJ-87B". The 220-piece tool set keeps its perfect order thanks to the total of 7 ball-bearing drawers - so every piece is always at hand.

Gear lifter, FAULENZER, Powerlift

-Load capacity 1000 Kg

Exhaust gas heat exchanger 150mm, with fan and 80 mm hot air connection, uses the heat from the exhaust gases, which can be blown into the same room or distributed to another room.

• sealed sand blast cabinet with automatic extraction, incl. filter cartridge
• durable and stable steel construction
• Front door with rubber gaskets and door contacts
• integrated pressure regulator and pressure gauge
• large window and interior lighting
• Operation manually via hand gun or by adjustable automatic pistol with foot remote control
• Control Panel with display and control for pressure adjustment, suction, light, on / off switch and foot remote control
• Safety device on the doors

• 2 x integrated work gloves
• 2 x neon light of á 20 Watt
• 1 x adapter plug 220V
• 1 x extraction with filter cartridge
• 2 x exhaust ports for the connection of extractors for dirt - and dust-free work
• 1 x beam gun with air hoses
• 1 x mounted injector blasting gun with ceramic nozzle (foot actuated) top hanging in the Cabinet, for fatigue-free blasting small parts.
• 1 x pressure reducer with pressure gauge to adjust the blasting pressure of the fixed gun
• 4 x replaceable ceramic nozzles for spray gun 4 mm, 5 mm, 6 mm, 7 mm
• 3 x protector large
• 3 x protector small
• 1 x pedal foot control
• 1 x hole plate
• 1 x sealing materials (adhesive seal, Teflon tape)

• Industry
• Automotive trades
• Restoration
• House -, Court - and hobby area

• Powerful, robust compressor
• Condensate is drained using a ball valve
• Oil level check through sight glass
• Two cylinders

• Ready for immediate use
• Additional foot pedal for raising the forks

Main car jack, wheel lift, pit jack for RP-TOOLS 4-post lifts, scissor lifts, and assembly pits. Load capacity: 2500 kg, lifting height: 643 mm, adjustable width: 766-1626 mm. Reinforced version, pump not included! We also offer an optional hand or air pump. Suitable rails must be available.

Edelstahl Werkzeugwagen rollbar 15 Schubladen

The RP-HA90 pneumatic pressure assisted arm makes it easy to assemble and disassemble low profile, wide and run-flat tires and is essential for a professional tire assembly.

• Powerful, robust compressor
• Condensate is drained using a ball valve
• Oil level check through sight glass
• Two cylinders

The new mobile tire balancing machine with max. rim diameter up to 26" and FREE accessories.

• Mobile version
• Manual operation
• Static balancing mode
• Dynamic balancing mode

Mobile IR paint dryer RP-S3000 in European industrial quality for use in the "spot/repair" area.

• Beam power: 3 x 1000W
• Drying area: 800 x 1000 mm
• Easy operation thanks to new electronic control
• First-class industrial quality

High lift truck pallet truck stacker 300 cm 1500 kg

• Ready for immediate use
• Additional foot pedal for raising the forks

Professional sandblasting cabin type 420L - the perfect device for blasting medium and large parts

• Air requirement: 350~750 l/min
• Permissible Maximum pressure: 8 bar
• Working pressure: approx. 6 bar

Stationary nitrogen generator for tires on motorcycles, cars, trucks, buses and commercial vehicles

This nitrogen generator is the optimal solution for generating N2 yourself with an inflation capacity of 3,000 l/hour. at 8 bar.

Professional wheel balancing machine from RP-TOOLS with G2 measuring technology and rim diameters up to 32 inches - suitable for balancing car, truck and motorcycle tires

• Automatic, static and dynamic unbalance determination in one measurement run
• Automatic start/stop when the hood is lowered or opened
• Quick clamping nut for quick assembly of the wheel on the balancing machine
• Display optionally in grams/ounces & mm/inch
• Self-diagnosis & Self-calibration
• Static, dynamic and aluminum wheel balancing programs
• Rapid Optimization (OPT)

Pallet stacker RP-CH-1516 incl. The waste press kit from RP-TOOLS reduces waste quantities by min. 50%. Thanks to the easy installation, the refuse press attachment with the high-lift truck is quickly in use. With the construction, the container is pressed against the attachment from below and waste quantities are reduced.

• Immediately ready for operation
• Additional foot pedal for lifting the forks

Professional tire changer from RP-TOOLS for efficient work and gentle handling of tires and rims for cars, vans, trucks and motorcycles.

• Semi-automatic tire changer in professional quality
• Self-centering 4-fold clamping jaw system
• Large selection of models with different configurations
• New model with wide mounting column
• Tire-clamping range up to 24 inches
• Maximum rim diameter up to 39 inches
• Includes tire inflator with pressure relief valve
• Including free accessories

• Powerful, robust compressor
• Condensate is drained using a ball valve
• Oil level check through sight glass
• Two cylinders

The RP-MHB700 is an electro-hydraulic, particularly robust and safe scissor lift for motorcycles and scooters with 700 kg load capacity and a max. lifting height of 1200 mm. Ideal for motorcycles and scooters with a maximum weight of 700 kg. On request, it is equipped with extensions that make it possible to lift 3-wheel and small cars safely.

This all-round oil-fired heating system can be used with many types of oil. Vegetable, animal and mineral oils, for example rapeseed oil, soybean oil, engine oil, universal oil and deep frying oil.

Sealed industrial sandblast cabin with automatic extraction as robust steel construction, perfect for blasting medium and large parts.

• Air requirement: 350~750 l/min
• Maximum permissible pressure: 8 bar
• Working pressure: approx. 6 bar

Professional wheel balancer from RP-TOOLS with G2 microprocessor technology and rim diameter up to 32". Suitable for balancing car, truck and motorcycle wheels.

• Automatic static and dynamic imbalance evaluation in a single measuring run.
• Automatic start / stop, when lowering / raising the safety hood.
• Quick release nut for a rapid mounting of the wheel on the balancing machine.
• Display in grams/ounces & inches/millimeters.
• Self-diagnosis & self-calibration.
• Static, dynamic & alloy rims balancing programs.
• Rapid optimization (OPT).
• Including free accessories.

The RP-U221PN tire changer from RP-TOOLS is a fully automated, first-class, high quality tire changer.

• New model with extra wide hexagonal column
• Tire clamping range up to max. 24 inches
• Maximum rim diameter up to 39 inches
• Incl. free accessories